Filter
Top Products
Display Port Connections
149
Example
Enter:
3 3 2 3.1.2 a 0
The following information is displayed:
Port Static Connection Parameters
Table 22 shows the port static connection parameters displayed by the
command.
Conn Call Port Member Conn Conn Oper Admin Originator CLP
number number number number type VPI/VCI status status
----- ----- -------- ------ ------- ------- -------- -------- ---------- ---
1 1 <1.1.1> PVC,P2P 3/200 Active Active Calling N
Table 22 Port Static Connection Parameters
Name Description
Connection number Number identifying the connection.
Call number Number identifying the call.
Port number Number identifying the port.
Member number Sequential numbering of ATM addresses registered at a
port. Used to specify SVC.
Connection Type Whether the connection is using SVC or PVC, and if it is a
point-to-point (P2P) or point-to-multipoint (P2M) call.
Connection VPI The Virtual Path Identifier (VPI) value defined for the
connection.
Connection VCI The Virtual Channel Identifier (VCI) value defined for the
connection.
Operational Status The operational status of the connection, active or not.
Administration Status The administration status of the connection, active or not.
Originator Whether the connection originates at the calling UNI or
the called UNI.
CLP The action which is to be performed on the CLP bit. The
possible values are: clear bit (0), set bit (1), or no
change(N).