Filter
Top Products
148
C
HAPTER
7: C
ONFIGURING
V
IRTUAL
C
HANNELS
Display Static
Address Port
Connection
Display a connection relating to a specific VPI/VCI of the port or all
connections (all VPI/VCI) of the port. The connections involve virtual
channels created between static addresses defined by LMA.
Command Actions
Command Result
Originator Specifies if the connection is originated at the calling UNI or
the called UNI.
CLP Specifies the action which is to be performed on the CLP
bit. The possible values are: clear bit (0), set bit (1), or no
change (N).
Table 21 Port SVC Connection Parameters (continued)
Name Description
Enter the menu sequence:
(3) CON: Connections
(3) PRT: ATM ports
(2) STC: Static addresses
Enter a parameter at the prompt
Parameter Format or Range
Port number <slot.group.port>
VPI Enter a VPI value or
A
for all VPI values
VCI Enter a VCI value or
A
for all VCI values
Direct access sequence:
3 3 2
[parameters]
System action taken:
The connection information for the specified port is
displayed.
System message display:
Information is displayed as shown in the example.