Filter
Top Products
ILMI Setup
121
Update ILMI Channel
Polling Status
Update and save the channel polling facility status for the specified port
in the CoreBuilder 9000 ATM Enterprise Switch.
Command Actions
Command Result
Example
Enter:
1 1 8 4 2
3.1.2
1
The following message is displayed:
ILMI polling is set to ENABLED.
The polling status of port 3.1.2 is enabled and is saved to flash.
Enter the menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch Setup
(8) IME: ILMI Setup
(5) POL: Polling Setup
(2) SST: Set Polling Status
Enter a parameter at the prompt
Parameter Format or Range
Port ID <slot.group.port> or
0.0
for all ports
ILMI polling
enable/disable
0
to disable ILMI polling
1
to enable ILMI polling
Direct access sequence:
1 1 8 4 2
[parameters]
System action taken:
ILMI polling for the selected port is updated and
saved.
System message display:
ILMI polling is set to
<ENABLED/DISABLED>.