Filter
Top Products
378
C
HAPTER
11: C
ONFIGURING
AND
M
ANAGING
PNNI
Set Optimization for
RealTime-VBR
Updates the Real Time Variable Bit Rate (VBR) optimization parameter. A
change to the RtVBR optimization parameter takes place immediately.
Command Actions
Command Result
Example
Enter:
1 1 9 4 3 5 2 2 2
The following message is displayed:
Default Value is ‘3 - opt_ctd’, New value is ‘2 - opt_av_cr’
Press ENTER to continue...
The value of the RealTime-VBR optimization parameter is updated.
Enter menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch setup
(9) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(5) OPT: Optimization Metrics
(2) SOP: Set Optimization
Metrics
(2) ORV: Optimization for
RealTime-VBR
Enter a parameter at the prompt
Parameter
Format or Range
constant bit rate 0 - 6
Direct access sequence:
1 1 9 4 3 5 2 2
[parameters]
System action taken:
The real time VBR optimization parameter is displayed
and is updated to its new value.
System message display:
Default value is <x>, new value is
<y>.