Filter
Top Products
402
C
HAPTER
11: C
ONFIGURING
AND
M
ANAGING
PNNI
Set Cache State for
ADD PARTY
Determines whether or not the last cache accumulated for a route
(between a specific source and any destination that has previously been
accessed) will continue to be used when an ADD PARTY route is added
(Save) or will be reinitialized (Drop). The default cache state for ADD
PARTY is Save. If the cache refresh is dropped, all caches for recently
calculated routes will be reinitialized. A change to the cache refresh status
takes place immediately.
Command Actions
Command Result
Example
Enter:
1 1 9 4 6 4 1
The following message is displayed:
Drop Cache after ADD PARTY route calculation.
Press ENTER to continue...
Enter menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch setup
(9) PNI: PNNI Setup
(4) CFP: Configure PNNI
(6) SCR: Set Route Cache (UBR)
Configuration
(4) GCS: Set Cache Refresh for
ADD PARTY
Enter a parameter at the prompt
Parameter
Format or Range
Include Add Party Route
0
- save
1
- drop
Direct access sequence:
1 11 1 9 10 4 6 4
System action taken:
The PNNI cache is updated/not updated when an ADD
PARTY route is calculated.
System message display:
Save/Drop PNNI cache - when ADD PARTY
route is calculated.