Filter
Top Products
346
C
HAPTER
11: C
ONFIGURING
AND
M
ANAGING
PNNI
Get Peer Group ID
Displays the Peer Group ID of the PNNI node. For more information of
peer groups, see “Organizing a Network Hierarchy” on page 183 in the
Operations Guide. A change to the peer group id takes place after the
next reboot.
Command Actions
Command Result
Example
Enter:
1 1 9 4 3 3 3 1
The following message is displayed:
PNNI Node 1 of 1. Node Peer Group Id:
48.47.00.00.00.00.00.3C.00.00.00.00.00.00
Enter menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch setup
(9) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(3) CHR: Characteristics
(3) PID: Peer Group ID
(1) GPI: Get Peer Group ID
Direct access sequence:
1 1 9 4 3 3 3 1
System action taken:
The peer group id of the PNNI node is displayed.
System message display:
PNNI Node 1 of 1. Node Peer Group Id:
<address>