Filter
Top Products
222
C
HAPTER
9: M
ANAGING
LAN E
MULATION
Enable or Disable LE
Servers Redundancy
Enable and disable the LECS-based LANE redundancy facility in the
CoreBuilder 9000 ATM Enterprise Switch. For more information, see
“Redundant LANE Services” on page 137 in the Operations Guide.
Command Actions
Command Result
Example
Enter:
1 1 5 4 2 0
The following message is displayed:
Redundancy mode changed.
The LECS-based LANE redundancy facility in the CoreBuilder 9000 ATM
Enterprise Switch is disabled
.
Enter menu sequence:
(1) SYS: Platform config
(1) SET: Switch setup
(5) SLE: LE setup
(4) RDN: LE Service redundancy setup
(2) LRM: Change LE Service
redundancy Mode
Enter a parameter at the prompt
Parameter Format or Range
Enable/disable
0
to disable
1
to enable
Direct access sequence:
1 1 5 4 2
[parameters]
System action taken:
The LECS-based LANE redundancy facility in the
CoreBuilder 9000 ATM Enterprise Switch is enabled or
disabled.
System message display:
Redundancy mode changed.