Filter
Top Products
LEC Operations
301
LEC Connection Information Parameters
Table 44 shows the LEC Connection Information parameters displayed by
the command.
.
Example
Enter:
2 2 3 2 1 0
The LEC information for all LECs of the specified ELAN is displayed as
follows:
Table 44 LEC Connection Information
Name Description
LEC ID LEC ID number.
State Current LEC state:
Joining—the LEC is performing Point-to-Point direct
connection to the LES, or the LEC is sending the “join”
request.
ADD Party—the LES is adding the LEC to its
Point-to-Multipoint distribute connection
Operational—the client is now ready to operate.
CTRL Direct
mem_id/call_id
LES member_id and the point-to-point call_id between the LES
and the LEC
MCAST send
mem_id/call_id
BUS member_id and the point-to-point call id between the
ELAN’s BUS and the LEC
ATM Addresses User part of the LEC ATM address.
Is Proxy Whether the LEC is a proxy or not.
LEC State Ctrl Mcast ATM addresses: Is
id Direct send User part proxy
mem_id/ mem_id/
Call_id Call_id
--- ----------- --------- ---------- ------------------- --------
22 Operational 1701/7766 1701/7767 8.0.4e.b.db.53.0 YES
1 Operational 1701/ 10 1701/ 43 0.c0.da.3.4e.d1.0 YES