Filter
Top Products
LEC Not in ELAN Security List
315
Update LEC ELAN Join
Privilege for Current
Session
Updates the default ELAN join privilege for LECs which are not in the
ELAN security list for the current session. The default join privilege can be
Accept or Reject.
You need to save to flash to maintain this parameter after the next
reboot.
Command Actions
Command Result
Example
Enter:
2 3 1 2 1 1
The following message is displayed:
Default behavior changed successfully.
Any LEC currently in operational state will remain so unless
it is restarted.
The default ELAN join privilege for LECs which are not in the ELAN
security list is changed to Accept for the ELAN with ID 1.
Enter menu sequence:
(2) LEM: LAN Emulation
(3) SEC: LE Security Configuration
(1) EDB: Elan default behavior
(2) SDF: Set elan default behavior
Enter a parameter at the prompt
Parameter Format or Range
ELAN ID
1
–
16
See “Display ELAN Parameters in LES Database” on
page 283.
Join Privilege
1
–Accept
2
–Reject
Direct access sequence:
2 3 1 2
[parameters]
System action taken:
The ELAN join privilege for LECs which are not in the
ELAN security list is changed for the current session.
System message display:
Default behavior changed successfully.
Any LEC currently in operational state
will remain so unless it is restarted.