Filter
Top Products
Setting Interface Parameters
385
Set Aggregation
Toke n
Sets the aggregation token. The aggregation token is a number assigned
to an outside link by the border nodes.
This option is currently not supported in this version.
Command Actions
Command Result
Example
Enter:
1 1 9 4 4 2 1 50
The following message is displayed:
Default value is 0, new value is set to 50
Press ENTER to continue...
Enter menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch setup
(9) PNI: PNNI Setup
(4) CFP: Configure PNNI
(4) ICF: Interface Configuration
(2) IPR: Interface Parameters
(1) AGT: Aggregation Token
Enter a parameter at the prompt
Parameter
Format or Range
aggregation token 1 - 2147483647
Direct access sequence:
1 1 9 4 4 2 1
[parameters]
System action taken:
The aggregation token is updated to its new value.
System message display:
Default value is 0, new value is set to
<n>