Filter
Top Products
Setting the Timers
365
Set AvCR
Proportional
Multiplier (%)
Sets the AvCR (Available Capacity for Minimum Cell Rate) proportional
multiplier percentage. The AvCR proportional multiplier percentage is the
proportional multiplier used in the algorithms that determine significant
changes for AvCR parameters, expressed as a percentage. A change to
the AvCR proportional multiplier percentage takes place after the next
reboot.
Command Actions
Command Result
Example
Enter:
1 1 9 4 3 4 9 15
The following message is displayed:
Default Value is 50, new value is 15
Press ENTER to continue...
Enter menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch setup
(9) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(4) TIM: Timers
(9) APM: AvCR Proportional
Multiplier(%)
Enter a parameter at the prompt
Parameter
Format or Range
percentage 1 - 99%
Direct access sequence:
1 1 9 4 3 4 9
[parameters]
System action taken:
The AvCR proportional multiplier is displayed and is
updated to its new value.
System message display:
Default value is <x>, new value is <y>