Filter
Top Products
ILMI Setup
123
Update ILMI Channel
Polling Interval
Update and save the ILMI channel polling interval for the specified port in
the CoreBuilder 9000 ATM Enterprise Switch. The minimum value of the
polling interval is 30 seconds. The default ILMI polling value is 30
seconds.
Command Actions
Command Result
Example
Enter:
1 1 8 4 4 3.1.2 30
The following message is displayed:
ILMI polling timeout reconfigured.
The polling timeout of port 3.1.2 is set to 30 seconds and is saved to
flash.
Enter the menu sequence:
(1) SYS: Platform configuration
(1) SET: Switch setup
(8) IME: ILMI setup
(4) POL: Polling setup
(4) STO: Set Polling time-out
Enter a parameter at the prompt
Parameter Format or Range
Port ID <slot.group.port> or
0.0
for all ports
Polling interval Range: 30-1800 seconds
Direct access sequence:
1 1 8 4 4
[parameters]
System action taken:
The polling interval for the specified port is updated
and saved.
System message display:
ILMI polling timeout reconfigured.