Filter
Top Products
90
C
HAPTER
5: C
ONFIGURING
THE
P
LATFORM
Set Standby Switch
Fabric Module to
Suspended/ In-service
Mode
Set the standby switch fabric module to suspended/in-service mode.
When the standby switch fabric module is suspended, it cannot be used
to replace the active switch fabric module.
Command Actions
Command Result
Example
Enter:
1 4 3 2
The following prompt is displayed:
Put Stand-by Switch to Suspended mode!
Are you sure (Y/N)?
y
The following message is displayed:
Stand-by Switch mode changed to Suspended mode.
Enter the menu sequence:
(1) SYS: Platform configuration
(4) SWM: Switch modules
(3) SSM: Stand-by Switch Module
(2) SIS: Stand-by
In-service/Suspended
Direct access sequence:
1 4 3 2
System action taken:
The standby switch is set to suspended/in-service
mode.
System message display:
Stand-by Switch mode changed to
Suspended/In-Service mode.