Filter
Top Products
276
C
HAPTER
9: M
ANAGING
LAN E
MULATION
Redundant ELANs Specific Parameters
Table 36 describes the ELANs specific parameters.
Table 36 Redundant ELANs Specific Parameters
Parameter Description
ELAN name The ELAN name.
ELAN status The status of the ELAN. This can be:
Operational The ELAN is operating normally.
New A newly created ELAN that has not
yet been processed by the LECS.
Init A newly created ELAN that is in the
process of becoming operational.
Old The ELAN is in the process of
becoming inoperable.
ELAN State The state of the ELAN. This can be Primary, Secondary, In
Check (when the ELAN is in transient state) or No LES.
State start time (Sec) The absolute time the CoreBuilder
®
9000 ATM Enterprise
Switch was started (in seconds).
Number config
requests O.K.
The number of configuration requests for this ELAN that
were okayed.
Number config
requests failed
The number of configuration requests for this ELAN that
were failed. A request can fail if the ELAN State is ‘NO LES’,
meaning no LES is connected.
Primary LES Id The Id of the primary LES.
Secondary LES Id The Id of the secondary LES.