Filter
Top Products
116
C
HAPTER
6: M
ANAGING
N
ETWORK
I
NTERFACES
Display
Auto-discovery
Status
Display the auto-discovery status for the specified port of the CoreBuilder
9000 ATM Enterprise Switch. Auto-discovery determines, by negotiation,
the common protocol parameters, ATM interface type and IME type to be
used by the ILMI channel. The status can be either enabled or disabled.
For more information about auto-discovery, see “Auto-Discovery” on
page 57 in the Operations Guide.
Command Actions
Command Result
Example
Enter:
1 1 8 2 1 3.1.2
The following message is displayed:
Auto-Configuration is ENABLED.
Enter the menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch Setup
(8) IME: ILMI Setup
(3) AUD: Auto-Discovery Setup
(1) GET: Get Auto-Discovery
ON/OFF Status
Enter a parameter at the prompt
Parameter Format or Range
Port ID <slot.group.port>
Direct access sequence:
1 1 8 2 1
[parameters]
System action taken:
The auto-configuration status for the specified port is
displayed.
System message display:
Auto-Configuration is
<ENABLED/DISABLED>.