Filter
Top Products
392
C
HAPTER
11: C
ONFIGURING
AND
M
ANAGING
PNNI
Reset All PNNI
Interface Parameters
to Default Values
Resets all the PNNI parameters for all interface ports to their default
values. The parameter reset takes place immediately.
Command Actions
Command Result
Example
Enter:
1 1 9 4 4 3 y
The following message is displayed:
All PNNI interface parameters were set to their defaults
Enter menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch setup
(9) PNI: PNNI Setup
(4) CFP: Configure PNNI
(4) ICF: Interface Configuration
(3) SDF: Set all interface
parameters to defaults
Enter a parameter at the prompt
Parameter
Format or Range
Confirm reset
y
or
n
Direct access sequence:
1 1 9 4 4 3
System action taken:
All the parameters for all the interface ports are set to
their default values.
System message display:
All PNNI interface parameters were set
to their defaults