Filter
Top Products
Setting Optimization Metrics
381
Set Optimization for
UBR
Updates the Unspecified Bit Rate (UBR) optimization parameter. A change
to the UBR optimization parameter takes place immediately.
Command Actions
Command Result
Example
Enter:
1 1 9 4 3 5 2 5 5
The following message is displayed:
Default Value is ‘0 - opt_admin_weight’, New value is ‘5 -
opt_clr_clp0’
Press ENTER to continue...
The value of the UBR optimization parameter is updated to 5.
Enter menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch setup
(9) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(5) OPT: Optimization Metrics
(2) SOP: Set Optimization
Metrics
(5) OUR: Optimization for UBR
Enter a parameter at the prompt
Parameter
Format or Range
constant bit rate 0 - 6
Direct access sequence:
1 1 9 4 3 5 2 5
[parameters]
System action taken:
The UBR optimization parameter is displayed and is
updated to its new value.
System message display:
Default value is <x>. New value is
<y>.