Filter
Top Products
118
C
HAPTER
6: M
ANAGING
N
ETWORK
I
NTERFACES
Display LECS Access
Options
Display the current communication channel between LEC and LECS for
the specified port of the CoreBuilder 9000 ATM Enterprise Switch. The
LECS-via-ILMI parameter determines whether the LEC that is attached to
the port connects to the LECS by ILMI or by the
well-known
address.
Command Actions
Command Result
Example
Enter:
1 1 8 3 1
3.1.2
The following message is displayed:
LECS via ILMI is ENABLED.
Enter the menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch Setup
(8) IME: ILMI Setup
(4) MIB: ILMI MIB View Setup
(1) GET: Get LECS via ILMI
ON/OFF Status
Enter a parameter at the prompt
Parameter Format or Range
Port ID <slot.group.port>
Direct access sequence:
1 1 8 3 1
[parameters]
System action taken:
The LECS-via-ILMI status for the specified port is
displayed.
System message display:
LECS via ILMI is <ENABLED/DISABLED>.