Filter
Top Products
Setting the Timers
373
Set All Timers to Their
Default Values
Resets all the timers in the timers menu to their default values.
Command Actions
Command Result
Example
Enter:
1 1 9 4 3 4 18 y
The following message is displayed:
PNNI Node 1 of 1.
All Timers were set to their defaults
Press ENTER to continue...
All the timers are set to the default values.
Enter menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch setup
(9) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(4) TIM: Timers
(18) STD: Set All Timers to their
Default Values
Enter a parameter at the prompt
Parameter
Format or Range
Confirm reset
y
or
n
Direct access sequence:
1 1 9 4 3 4 18
System action taken:
All the timers are reset to their default values.
System message display:
All timers were set to their defaults.