Filter
Top Products
LAN Emulation Redundancy
277
Display Redundant
LES General
Information
Display general information on a redundant LES.
Command Actions
Command Result
Example
Enter:
2 1 5 9 6
The following information is displayed.
Redundant LES General Parameters
Table 37 describes the redundant LES general parameters.
Enter menu sequence:
(
2) LEM: LAN Emulation
(1) LCS: LE Configuration Service
(5) LNT: LECS Network topology
(9) RDN: LE Service redundancy
(6) RLG: Display Redundant LESs
general info
Direct access sequence:
2 1 5 9 6
System action taken:
The general redundant LES information is displayed.
System message display:
Information is displayed as shown in the example.
Table 37 Redundant LES General Parameters
Parameter Description
Id The LES Id number.
State The state of the LES. This can be Establish, Being
Established or No Connection.
Internal/External The location of the LES. This can be:
Internal The LES is on the same switch as the
LECS.
External The LES is not on the same switch as
the LECS.
Id STATE Internal / External
------------------------------------------
0 ESTABLISH INTERNAL
1
ESTABLISH INTERNAL