Filter
Top Products
ATM Addresses Port Table
133
Add ATM Address to
Port
Add an ATM address to the list of registered ATM addresses at a port.
Enter the port number and ATM address. Use this command, for
example, with devices that do not support ILMI; you must add ATM
addresses manually to interface with such devices.
Command Actions
Command Result
Example
Enter:
3 4 2 2 5.1.2 47.0.0.0.0.0.3c.0.0.b*
The following message is displayed.
ATM address was successfully set.
Enter the menu sequence:
(3) CON: Connections
(4) S&C: Setup of Connections and ATM
addresses
(2) STP: Static ATM Addresses Setup
(2) ADD: Add ATM Address
Enter a parameter at the prompt
Parameter Format or Range
Port ID <slot.group.port>
ATM address 19 bytes - When fewer: end with '.*'
Direct access sequence:
3 4 2 2
[parameters]
System action taken:
Specified ATM address is added to specified port.
System message display:
ATM address was successfully set.