Filter
Top Products
368
C
HAPTER
11: C
ONFIGURING
AND
M
ANAGING
PNNI
Set CTD Proportional
Multiplier (%)
Sets the CTD proportional multiplier percentage. The CTD proportional
multiplier percentage is a percentage of the last advertised Maximum Cell
Transfer Delay. A change to the CTD proportional multiplier percentage
value takes place after the next reboot.
Command Actions
Command Result
Example
Enter:
1 1 9 4 3 4 12 25
The following message is displayed:
Default Value is 50, new value is 25
Press ENTER to continue...
Enter menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch setup
(9) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(4) TIM: Timers
(12) CTD: CTD Proportional
Multiplier(%)
Enter a parameter at the prompt
Parameter
Format or Range
percentage 1 - 99%
Direct access sequence:
1 1 9 4 3 4 12
[parameters]
System action taken:
The CTD proportional multiplier is displayed and is
updated to its new value.
System message display:
Default value is <x>. New value is <y>