Filter
Top Products
406
C
HAPTER
11: C
ONFIGURING
AND
M
ANAGING
PNNI
PTSE Table Parameters
Table 50 through Table 56 describe the parameters displayed in the PTSE
table. For clarity, the information has been divided into different sections:
Table 50 PTSE Table Parameters - PTSE Section
Parameter Description
Level # Hierarchical level.
Node # The number of the node.
Node Id The node id in hex (22 bytes).
ATM Address The ATM address of the node (19 bytes).
MAC Address The MAC address of the node (6 bytes)
PTSE Id. The PTSE id.
Length The length of the PTSE in bytes.
Type PTSE type. This may be one of the following:
96 - Nodal state parameters
97 - Nodal information group
224 - Internal reachable ATM addresses
256 - Exterior reachable ATM addresses
288 - Horizontal links
289 - Uplinks
640 - System Capabilities
Seq. no. PTSE sequence number.
CkSum Checksum. The PTSE checksum includes the logical
node ID and the Originating Node’s Peer Group ID
from the PTSP header as well as the entire contents of
the PTSE (including the PTSE header), and excludes the
PTSE remaining lifetime.
Lifetime The remaining lifetime of the PTSE (in tenths of a
second)
Description A brief description of the type of PTSE. See the Type
parameter above for the full list of types.
Table 51 PTSE Table Parameters - Node Topology Link Section
Parameter Description
Node # The number of the node.
Node Id The node id in hex.
ATM Address The ATM address of the node.
MAC Address The MAC address of the node.