Filter
Top Products
Password Setup
51
Update Read-access
Password
Update the read-access password. Enter the new password a second
time.
To accept the default password, press Enter.
Command Actions
Command Result
Example
Enter:
1 1 1 1
The following dialog is displayed. Note that the passwords themselves are
not displayed.
Enter the new read password:
mypassw
Enter the new read password again:
mypassw
The password has been changed.
The read-access password is updated.
Enter menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch Setup
(1) PAS: Password Setup
(1) REA: Set Read-access Password
Enter a parameter at the prompt
Parameter Format or Range
New password 0 to 8 alphanumeric characters
New password
confirmation
Enter the password exactly as you did before.
Direct access sequence:
1 1 1 1
System action taken:
The read-access password is updated.
System message display:
The password has been changed.