Filter
Top Products
LANE Version of Switch
225
Set Switch LANE
Version
Sets the LANE version of the switch. If currently there are LECs joined in
ELANs, they remain joined and the version change affects only new LECs
that join after the change.
After setting the LANE version, reset the ELANs that have LECs connected
to them. This should be done very carefully: reset the first ELAN, wait
until all the LECs have connected, then reset the next ELAN and so on.
Command Actions
Command Result
Enter menu sequence:
(2) LEM: LAN Emulation
(4) LVR: Lane Version of Switch
(2) SLV: Set switch lane version
Enter a parameter at the prompt
Parameter Format or Range
LANE version
1
for v1.0
2
for v2.0
Direct access sequence: 2 4 2
System action taken:
The LANE version of the switch is changed.
System message display:
Version has been changed successfully.
Currently joined v2.0 LECs remain as
such.