Filter
Top Products
78
C
HAPTER
5: C
ONFIGURING
THE
P
LATFORM
Reset All Except IP
Addresses
Reset configuration parameters for the CoreBuilder 9000 ATM Enterprise
Switch to their factory default settings with the exception of the IP
parameters.
Some parameters are reset only after the next reboot. These parameters
include ATM addresses, PVC, and NMS parameters.
Command Actions
Command Result
Example
Enter:
1 2
The following message is displayed:
Reset of all saved configuration except IP was done.
All configuration parameters are reset to their factory values.
Enter the menu sequence:
(1) SYS: Platform Configuration
(2) FLS: Flash setup
(2) RES: Reset All Except IP
Addresses to Defaults
Direct access sequence:
1 2 2
System action taken:
All configuration parameters except IP are reset to their
factory default values.
System message display:
Reset of all saved configuration except
IP was done.