Filter
Top Products
110
C
HAPTER
5: C
ONFIGURING
THE
P
LATFORM
Example
Enter:
1 8 3 5.1.2
The following prompt is displayed:
This operation will change the active clock source.
Do you really want to change it (Y/N)?
Y
The following message is displayed:
External clock source port 2 was successfully configured to
port <5.1.2>.
Set Clock Source to
Internal
Reset the clock source configuration to its default values.
Command Actions
Command Result
Example
Enter:
1 8 4
The following prompt is displayed:
Do you really want to reset config? [y/n]
y
The following message is displayed:
Clock Source configuration was set to default.
Enter menu sequence:
(1) SYS: Platform Configuration
(8) SCS: Switch Clock Synchronization
Setup
(4) RST: Set Clock Source to Internal
Direct access sequence:
1 8 4
System action:
The clock source configuration is reset to its default
values.
System message display:
Clock Source configuration was set to
default.