Filter
Top Products
382
C
HAPTER
11: C
ONFIGURING
AND
M
ANAGING
PNNI
Set Optimization for
All Classes to Default
Resets all the optimization parameters to their default values.
Command Actions
Command Result
Example
Enter:
1 1 9 4 3 5 2 6 y
The following message is displayed:
PNNI Node 1 of 1.
All optimization metrics were set to their defaults.
Press ENTER to continue...
Enter menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch setup
(9) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(5) OPT: Optimization Metrics
(2) SOP: Set Optimization
Metrics
(6) ODF: Set Optimization for
All Classes to Default
Enter a parameter at the prompt
Parameter
Format or Range
Confirm reset
y
or
n
Direct access sequence:
1 1 9 4 3 5 2 6
System action taken:
All the optimization parameters are reset to their
default values.
System message display:
All optimization metrics were set to
their defaults.