Filter
Top Products
Downloading System Software
81
Download System
Software by TFTP
Perform TFTP software download. Specify the Server IP address and
software file names. See the Release Notes for the full TFTP software
download procedure.
The TFTP download procedure runs in the background. Therefore, no
message is displayed at the end of the procedure. To check the status,
use the Display Software Download Status option. For details, see“Display
Software Download Status” on page 79.
Command Actions
Command Result
Example
Enter:
1 3 2
The following prompts are displayed:
Server IP address:
100.1.0.131
Enter file name:
config1
Start download from 100.1.0.131, config1 (Y/N)?
y
The following message is displayed:
Download process started...
Enter the menu sequence:
(1) SYS: Platform Configuration
(3) LOA: Load System Software
(2) FTP: Perform TFTP Software
Download
Enter a parameter at the prompt
Parameter Format or Range
Server IP address <0.0.0.0>
File name <file name>
Direct access sequence:
1 3 2
[parameters]
System action taken:
Software is downloaded by TFTP to the
CoreBuilder 9000 ATM Enterprise Switch.
System message display:
Download process started . . .