Filter
Top Products
Downloading System Software
83
Upload Configuration
Upload the Switch configuration, LANE or LANE database configuration,
or PNNI configuration from the CoreBuilder 9000 ATM Enterprise Switch
to an external host. Specify the server IP address and the target
configuration file name.
Command Actions.
Command Results
Example
Enter:
1 3 4 1 151.104.21.147 cfgtest.cfg
The following prompt is displayed:
Start upload to 151.104.21.147, cfgtest.cfg (Y/N)?
y
The following message is displayed:
Upload process started...
The configuration is uploaded to the host.
Enter the menu sequence:
(1) SYS: Platform Configuration
(3) LOA: Load System Software
(4) TCU: Perform TFTP Configuration
Upload
Enter a parameter at the prompt
Parameter Format or Range
Configuration type
1
- Switch Configuration
2
- LANE Configuration
3
- LANE Security Database
4
- PNNI Configuration
Server IP address Valid IP address
Configuration file name Name of the target configuration file
Direct access sequence:
1 3 4
[parameters]
System action taken:
The configuration is uploaded to the external host.
System message display:
Upload process started...