Filter
Top Products
88
C
HAPTER
5: C
ONFIGURING
THE
P
LATFORM
Reset Switch
Reset the active switch fabric module. After the switch has been reset,
the system is rebooted.
While the system reboots (approx. 5 minutes), the standby switch
automatically becomes active.
When the standby switch fabric module is active, a new main menu
containing the following four options is displayed:
(1) Display Switch status
. For details, see “Display Switch
Fabric Module Status” on page 86.
(2) Reset Standby Switch Fabric Module.
For details, see
“Reset Standby Switch Fabric Module” on page 89.
(3) Logout.
For details, see “Logout” on page 100.
(4) Version.
For details, see “Display Software Versions” on
page 104.
Command Actions
Command Result
Example
Enter:
1 4 2
The following prompt is displayed:
Do you really want to reboot the switch? [y/n]
y
The switch is rebooted and the following messages are displayed:
Bootstrap V1.10 Jul 7 1998
CB9000 3Com NCD
============================
Moving the file from FLASH to DRAM ....
Going to operational code ....
Enter the menu sequence:
(1) SYS: Platform configuration
(4) SWM: Switch modules
(2) RSM: Reset Switch
Direct access sequence:
1 4 2
System action taken:
The active switch fabric module is reset.
System message display:
Information is displayed as shown in the example.