3Com 9000 Switch User Manual


 
Setting Up for Management 55
Display Current IP Configuration 56
Update IP Address 57
Display Current NMS IP Address 58
Update NMS Address 59
Display Current Default Gateway IP Address 60
Update Default Gateway IP Address 61
Display Current IP Subnet Mask 62
Update IP Subnet Mask 63
Display Current Read Community String 64
Update Read Community String 65
Display Current Write Community String 66
Update Write Community String 67
Display Ethernet Encapsulation Type 68
Update Ethernet Encapsulation Type 69
Set Management Configuration to Factory Defaults 70
Setting the Port Network Connection Type 71
Display Network Connection Type 72
Update Port Network Connection Type 75
Reset NNI Configuration 76
Resetting All Parameters 77
Reset All 77
Reset All Except IP Addresses 78
Downloading System Software 78
Display Software Download Status 79
Download System Software by TFTP 81
Download System Software by Serial Port 82
Upload Configuration 83
Download Switch/LANE/PNNI Configuration 84
Managing Switch Fabric Modules 86
Display Switch Fabric Module Status 86
Reset Switch 88
Reset Standby Switch Fabric Module 89
Set Standby Switch Fabric Module to Suspended/ In-service Mode 90
Upgrade Software Files 91
Configuring Interface Modules 92
Display Interface Module Information and Parameters 92
Set Port Frame Mode 96