Filter
Top Products
Create Permanent Virtual Channel (PVC)
159
Release PVC
Destination
Release a single destination connection (branch) from a
point-to-multipoint call. Specify the P2M call number and the output port
number and VPI/VCI of the destination connection.
Command Actions
Command Result
Enter the menu sequence:
(3) CON: Connections
(4) S&C: Setup of Connections and ATM
Addresses
(1) PVC: PVCs Setup
(6) REO: Release Out VC from call
Enter a parameter at the prompt
Parameter Format or Range
Call number of the P2M
connection
Integer. See“Display Call Routed to ATM Address” on
page 140
to get a call number for a port.
Destination connection
port number
<slot.group.port>
Destination connection
VPI
See “Display PVC VPI/VCI Limits” on page 151 for
VPI/VCI limits.
Destination connection
VCI
See “Display PVC VPI/VCI Limits” on page 151 for
VPI/VCI limits.
Direct access sequence:
3 4 1 6
[parameters]
System action taken:
A PVC call destination with parameters specified is
released.
System message display:
A message is displayed as shown in the example.