Filter
Top Products
258
C
HAPTER
9: M
ANAGING
LAN E
MULATION
Add ELAN ATM
Address
Add an ELAN ATM address for a specified ELAN ATM address database.
This database is disconnected from the real database.
Command Actions
Command Result
Example
Enter:
2 1 5 5 3
elan_73_9 47.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
The system responds with the confirmation:
ATM address was added to this elan.
Enter menu sequence:
(2) LEM: LAN Emulation
(1) LCS: LE Configuration Service
(5) LNT: LECS Network topology
(5) ATM: ATM Address Info
(3) ADD: Add new ATM address
Enter a parameter at the prompt
Parameter Format or Range
ELAN name Up to 32 characters. For more information, see “Add
ELAN” on page 259.
ATM Address 20 Hex bytes separated by dots
Direct access sequence:
2 1 5 5 3
[parameters]
System action taken:
The ATM address for the selected ELAN is added to the
debug mode ATM address database.
System message display:
ATM address was added to this elan.