Filter
Top Products
130
C
HAPTER
6: M
ANAGING
N
ETWORK
I
NTERFACES
Display De-registered
ATM Addresses at
Port
Display UME, static ATM or NNI addresses at the specified port that were
de-registered via LMA or UME but whose connections are still active.
Command Actions
Command Result
Example
Enter:
3 1 3 0.0
The following information is displayed:
Enter the menu sequence:
(3) CON: Connections
(1) ADD: Get ATM Addresses
(3) ACT: Get Not Active Registered
ATM Addresses at Port
Enter a parameter at the prompt
Parameter Format or Range
Port ID <slot.group.port> or
0.0
for all ports
Direct access sequence:
3 1 3
[parameters]
System action taken:
The de-registered UME, static ATM or NNI addresses
for the specified port are displayed.
System message display:
Information is displayed as shown in the example.
Port ATM address: Network prefix ATM address:user_part Member
number number
------- --------------------------------------- -----------------------------
-
<3.1.1> 47. 0. 0. 0. 0. 0.3c. 0. 0.b*. *. *. * *. *. *. *. *. *. * 31101
<3.1.2> 47. 0. 0. 0. 0. 0.3c. 0. 0.c*. *. *. * *. *. *. *. *. *. * 31201