Filter
Top Products
Create Permanent Virtual Channel (PVC)
155
Command Result
Example
Enter:
3 4 1 2 p2p 0 0 0 5.1.2 1 55 1 5.1.4 0 60
The following message is displayed:
A new PVC was created with call number: 11
Port Static Connection Parameters
Table 23 shows the port static connection parameter
s
that must be
entered at the prompt.
System action taken:
A full PVC with the required parameters is created.
System message display:
A new PVC was created with call number:
<n>
Table 23 Full PVC Call Parameters
Name Description
Call Type Whether the call defined is point-to-point (P2P) or
point-to-multipoint (P2M)
No default
Cell Loss level Threshold for cell based discard
Priority Whether the call cells are transferred through the
CoreBuilder
®
9000 ATM Enterprise Switch to the high
priority queue or low priority queue
Default: Low priority
First CLP The setting of the cell loss priority at the input port
First Port number The input port slot.group.port
First VPI The input port VPI value for the call
First VCI The input port VCI value for the call
Second Port number The output port slot.group.port
Second CLP The setting of the cell loss priority at the output port
Second VPI The output port VPI value for the call
Second VCI The output port VCI value for the call