Filter
Top Products
134
C
HAPTER
6: M
ANAGING
N
ETWORK
I
NTERFACES
Delete ATM Address
by Member ID
Delete the ATM address from the list of registered ATM addresses at a
port. The address is deleted from the MIB at the port; in other words, it is
de-registered. Specify the ATM address by its member ID. For a list of
addresses registered by LMA together with their member IDs, see
“Display Static ATM Addresses at Port” on page 128.
Only ATM addresses created via LMA can be deleted.
Command Actions
Command Result
Example
Enter:
3 4 2 3 11101
The following message is displayed:
ATM address member 11101 was deleted from port 1.1.1.
The ATM address with member number 11101 is deleted from the MIB at
port 1.1.1.
Enter the menu sequence:
(3) CON: Connections
(4) S&C: Setup of Connections and ATM
addresses
(2) STP: Static ATM Addresses Setup
(3) DEL: Delete ATM Address
Enter a parameter at the prompt
Parameter Format or Range
ATM address member id <slotgroupport0n>
Direct access sequence:
3 4 2 3
[parameters]
System action taken:
The specified ATM address is deleted from specified
port.
System message display:
ATM address member <n> was deleted from
port <x.x.x>