Filter
Top Products
MPOA Devices Configuration
235
Display Current MPC
Configuration
Displays all the current settings of the MPC variables.
Command Actions
Command Result
Example
Enter:
2 5 2 1
The following information is displayed:
Enter menu sequence:
(2) LEM: LAN Emulation
(5) MPA: MPOA Devices Configuration
(2) MPC: MPOA Client Configuration
(1) DIS: Display current config
Direct access sequence: 2 5 2 1
System action taken:
All the current settings of the MPC variables are
displayed.
System message display:
Information is displayed as shown in the example
below.
MPOA Client Configuration
-------------------------
MPC-p1 shortcut-setup frame count: 10 (a number)
MPC-p2 shortcut-setup frame time: 1 (seconds)
MPC-p3 flow detection protocols: IP
MPC-p4 MPC initial retry time: 5 (seconds)
MPC-p5 MPC retry time maximum: 40 (seconds)
MPC-p6 hold down time: 160 (seconds)