Filter
Top Products
54
C
HAPTER
5: C
ONFIGURING
THE
P
LATFORM
Set Password to
Factory Default
Reset the passwords to their factory default settings for the
CoreBuilder 9000 ATM Enterprise Switch. These are, for each type of
user: read access, write access, and administer access. For more
information on access levels, see the
CoreBuilder 9000 ATM Switch Fabric
Module Getting Started
Guide
.
To accept the default password, press Enter.
Command Actions
Command Result
Example
Enter:
1 1 1 4
The following prompt is displayed:
Do you really want to reset config? [y/n]
Enter
y
to confirm. The following message appears:
Password configuration was set to defaults.
The passwords are reset to their factory values.
Enter menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch Setup
(1) PAS: Password Setup
(4) PAS: Set Password configuration
to factory defaults
Enter a parameter at the prompt
Parameter Format or Range
Confirm reset
y
or
n
Direct access sequence:
1 1 1 4
[parameters]
System action taken:
The passwords are reset to their factory default values.
System message display:
Password configuration was set to
defaults.