Filter
Top Products
122
C
HAPTER
6: M
ANAGING
N
ETWORK
I
NTERFACES
Display ILMI Channel
Polling Interval
Display the ILMI channel polling interval for the specified port of the
CoreBuilder 9000 ATM Enterprise Switch. If enabled, the ILMI channel
VPI/VCI = (0/16) is periodically polled for connectivity.
Command Actions
Command Result
Example
Enter:
1 1 8 4 3
3.1.2
The following message is displayed:
ILMI polling timeout is 30 sec.
Enter the menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch Setup
(8) IME: ILMI Setup
(4) POL: Polling Setup
(3) GTO: Get Polling Timeout
Enter a parameter at the prompt
Parameter Format or Range
Port ID <slot.group.port> or
0.0
for all ports
Direct access sequence:
1 1 8 4 3
[parameters]
System action taken:
The ILMI channel polling interval for the specified port
is displayed.
System message display:
ILMI polling timeout is <n> sec.