Filter
Top Products
LAN Emulation Redundancy Setup
221
Display LE Service
Redundancy
Display parameters of the LES redundancy facility in the CoreBuilder 9000
ATM Enterprise Switch. For more information, see “LAN Emulation
Redundancy” on page 136 in the Operations Guide.
Command Actions
Command Result
Example
Enter:
1 1 5 4 1
The following information is displayed:
LES Redundancy Parameters
Table 28 shows the LES Redundancy Parameters displayed by the
command.
.
Enter menu sequence:
(1) SYS: Platform config
(1) SET: Switch setup
(5) SLE: LE setup
(4) RDN: LE Service redundancy setup
(1) DLR: Show LES redundancy params
Direct access sequence:
1 1 5 4 1
System action taken:
The LES redundancy parameters are displayed.
System message display:
Information is displayed as shown in the example.
LANE Service redundancy mechanism : Enabled
Startup Delay (Sec) : 600
Table 28 LES Redundancy Parameters
Name Description
LANE Service Redundancy Status Whether LANE service redundancy is enabled
or disabled.
Startup Delay Time elapsed between switch startup and
startup of LANE redundancy facility — in
seconds. Default is
600
.