Filter
Top Products
136
C
HAPTER
6: M
ANAGING
N
ETWORK
I
NTERFACES
Delete All Inactive
Addresses
Delete all ATM addresses that do not exist for the port but are currently
present in flash memory. These ports are not installed or failed.
Command Actions
Command Result
Example
Enter:
3 4 2 5
The following prompt is displayed:
Delete all inactive addresses from flash!
Are you sure (Y/N)?
Enter
y
to confirm. The following message is displayed:
Delete inactive addresses successfully.
ATM address -
User part
User part of ATM address.
Member number The member number provides a sequential numbering of ATM
addresses registered at a port. It is used to specify the
connection.
Man Always set to YES.
Table 19 Parameters (continued)
Name Description
Enter the menu sequence:
(3) CON: Connections
(4) S&C: Setup of Connections and ATM
addresses
(2) STP: Static ATM Addresses Setup
(5) DNA: Delete all inactive
addresses
Direct access sequence:
3 4 2 5
System action taken:
All inactive ATM addresses are erased.
System message display:
Delete inactive addresses successfully.