Filter
Top Products
DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115
Issue 1
April 2000
Adding or Removing Cabinet Hardware
6-58Add IP Interface Assembly
6
Figure 6-24. TN802B IP Interface External Cable Assembly
3. Read and follow any directions inserted into the package by the factory.
Connect the Cables
1. Determine into which port slot you are putting the TN802B IP Interface.
NOTE:
Make sure that at least 3 adjoining slots are free.
2. From the rear of the cabinet, connect the amphenol connector on the
external cable assembly to the backplane connector corresponding to
that slot (the highest numbered connector of the 3 slots required).
Figure Notes
1. Amphenol connector to connector
corresponding to TN802B slot
2. To VGA monitor
3. To USB (not used)
4. To keyboard
5. To mouse
6. To ethernet
7. 25-pin male connector to modem
8. 25-pin male connector to COM2
cbdfocto AWF 122398
2
1
3
45
6
78