Filter
Top Products
DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115
Issue 1
April 2000
Fiber Link Administration
A-13Administer Fiber Links
A
The following DS1 Converter Complex fields appear on Page 2 when the Is one
endpoint remoted via a DS1 Converter Complex field is
y
.
NOTE:
When you administer DS1 Converter TN1654 circuit packs, different fields
display.
■ DS1CONV Board Location
— Enter the cabinet, carrier, and slot that
identifies the physical location of the converter circuit pack connected to
the first endpoint of the fiber link. This is entered on Page 1 and displays
on Page 2.
■ DS1CONV Board Type
— Display-only field showing the type of DS1
Converter circuit pack for the first endpoint.
■ DS1CONV Board Location
— Enter the cabinet, carrier, and slot that
identifies the physical location of the converter circuit pack connected to
the second endpoint of the fiber link.
■ DS1CONV Board Type
— Display-only field showing the type of DS1
Converter circuit pack for the second endpoint. This field is updated via
the Change Circuit-packs command.
■ Facility Installed
— Enter
yes
in the B, C, and D columns under the DS1
Converter Facilities heading to indicate that this DS1 facility is physically
installed. At least facility A must be installed within the converter complex.
Default is
yes
for Facility A.
■ Passes Far-end Clock
— Enter "
yes
" in the B, C, and D columns under
the DS1 Converter Facilities heading to indicate that this DS1 facility is
suitable to be used as a clock source. If the DS1 signal does not come
directly from the far end converter circuit pack or the network (such as
when the signal is converted from digital to analog and then back to
digital), enter "
no
.” Default is
yes
for Facility A.
This field determines whether the DS1 converter circuit pack can use
receive DS1 signal timing to time the transmit fiber signal. This is
necessary for passing timing from a master PN to a slave PN across a
Converter Complex.
■ Digital Data Compatible
— Enter
yes
(default) in the B, C, and D
columns under the DS1 Converter Facilities heading to indicate that this
DS1 facility is suitable for transmission of digital data. At least Facility A
must be suitable for transmission of digital data. If Customer Premises
Equipment that alters digital data exists on this facility (such as with a
channel expansion multiplexer), enter
no
.