Filter
Top Products
DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115
Issue 1
April 2000
Upgrading R5r/R6r/R7r to R8r without Adding Memory
2-19Upgrade the software and hardware
2
8. Type
standard
or
daylight savings
in the
Type
field, according to the
current time in the local time zone. For example, if currently on standard
time, type
standard
.
9. Type the rule number in the
Daylight Savings Rule
field.
10. When all the information is correct, press
Enter.
11. Type
display time
and press
Enter to verify date and time data.
Set Core Dump Vector
1. Type
set vector f spe-maint
and press Enter to set the core dump vector to
perform a core dump on any system restart.
Enable TTI
NOTE:
Do this step only if the TTI is disabled and you want it enabled.
1. Type
change system-parameters features
and press
Enter to change the
TTI field back to its value before the upgrade.
Release MMI (H/C only)
1. Type
release board
cabinet carrier slot
and press
Enter to release the
circuit packs, which were busied out earlier.
Resolve Alarms
1. Type
display alarms
and press Enter to examine the alarm log. Resolve
any alarms that may exist using
DEFINITY Enterprise Communications
Server Release 8 Maintenance for R8r
.
Check Link Status
1. Type
display communication-interface links
and press Enter. Compare it
with the earlier status.
2. Type
status link
number
and press Enter. Repeat this step for each link.
Enable Scheduled Maintenance
1. Type
change system-parameters maintenance
and press Enter.
2. Type the appropriate time in the
Start
field to enable scheduled daily
maintenance. Make sure the
Save Translation
field is set to
daily
.