Filter
Top Products
DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115
Issue 1
April 2000
Upgrading G3rV2, V3, V4 to R8r and Adding Memory
1-16Upgrade the software and hardware
1
Verify software version
NOTE:
The
Tape Resident
field shows the software load number. Write it down
for use later.
If standard reliability:
1. Type
list configuration software-version
and press
Enter to verify that the
removable media contains the Release 8 software. This takes about 2
minutes.
If high or critical reliability:
1. Type
list configuration software-version long
and press
Enter to verify
that the removable media contains the Release 8 software.
Save Translations
1. Type
save translations tape
and press Enter to save translations to the
new removable media, which takes about 2 minutes.
Save Announcements (if necessary)
1. Type
save announce
tape
and press Enter to save announcements to the
new removable media.
Restore Disk
If standard reliability:
1. Type
restore disk full
and press
Enter to write the new software to disk.
Release 8 system software is now resident on the disk.
If high or critical reliability:
2. Type
restore disk full both
and press
Enter to write the new software to
disk.
NOTE:
This command may take up to 25 minutes to complete. Until this
command finishes, the system provides no user feedback on the
system access screen. Do not press
Enter while the command
executes. Doing so clears the terminal screen as the command
finishes, erasing any success or failure messages the system may
provide.