Filter
Top Products
Transfer Method Transfer Rate
(approximate)
Transfer Mode* Reading
Type
Local Bus 80 MBytes/s Real Time /
Post Measurement
Pre-arm /
Post-arm
Embedded Controller
(VME bus with SICL)
8 MBytes/s Real Time /
Post Measurement
Pre-arm /
Post-arm
DIAGnostic:UPLoad:SADDress?
(VME bus)
80 KBytes/s Real Time /
Post Measurement
Pre-arm /
Post-arm
READ?/FETCh?
(VME bus)
11 KBytes/s Post Measurement Pre-arm /
Post-arm
* Real time readings come directly from the A/D. Post measurement readings come from
memory. The transfer mode is set using the digitizer’s VINStrument:LBUS:FEED and
VINStrument:VME:FEED commands. See "‘VME Bus DataTransfers" and "Local Bus Data
Transfers" later in this chapter for more information.
Table 3-4. HP E1429A/B Data Transfer Methods and Rates
Figure 3-11. Retrieving Readings from Digitizer Memory
138 Understandin
g
the HP E1429 Di
g
itizer Chapter 3