Filter
Top Products
Parameter Command Power-on/Reset Setting
Macro useage
Automatic cal constant storage
Channel 1 calibration value
Channel 2 calibration value
Reading format
Channel 1 S/E input filter
Channel 1 S/E input impedance
Channel 1 S/E input state
Channel 2 S/E input filter
Channel 2 S/E input impedance
Channel 2 S/E input state
Channel 1 differential input filter
Channel 1 differential input state
Channel 2 differential input filter
Channel 2 differential input state
Input port select (channel 1)
Measurement range (channel 1)
Input port select (channel 2)
Measurement range (channel 1)
Reference oscillator freqency
Reference oscillator source
VME bus data source
VME bus data transfer mode
Local bus data source
Local bus data transfer mode
Local bus readings per block
Interleaved transfer mode
*EMC
CAL:STOR:AUTO
CAL1:VAL
CAL2:VAL
:FORM
:INP1:FILT
IMP
STAT
:INP2:FILT
IMP
STAT
:INP3:FILT
STAT
:INP4:FILT
STAT
:FUNC
:VOLT:RANG
:SENS2:FUNC
:SENS2:VOLT:RANG
:ROSC:EXT:FREQ
:ROSC:SOUR
:VINS:VME:FEED
MODE
:VINS:LBUS:FEED
MODE
:VINS:LBUS:SEND:POIN
POIN:AUTO
+0
1 (enabled)
+1.01850000E+000
+1.01850000E+000
ASC,+9
0 (disabled)
+5.00000000E+001
1 (enabled)
0 (disabled)
+5.00000000E+001
1 (enabled)
0 (disabled)
1 (enabled)
0 (disabled)
1 (enabled)
"VOLT1"
+1.02350000E+000
"VOLT2"
+1.02350000E+000
+2.00000000E+007
INTernal
"MEM:BOTH32"
OFF
"MEM:BOTH"
OFF
+2.00000000E+000
ON
Table B-2. HP E1429A/B Power-On/Reset Configuration ( returned by *LRN?)
334 Useful Tables Appendix B