Filter
Top Products
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
count
numeric 1 through 65535 |
MINimum|MAXimum|
9.9E+37|INFinity
none
MINimum selects 1 arm.
When only post-arm readings are specified, MAXimum is computed as:
524,288 / TRIGger:COUNt, up to a maximum of 65,535 arms . When
pre-arm readings have been specified, MAXimum selects 128 arms.
9.9E+37 is equivalent to INFinity.
Comments • Executable when initiated: No
• Coupled Command: Yes. This command is coupled to the total reading count
(TRIGger:STARt:COUNt). An error will result if TRIGger:STARt:COUNt is too
large for the specified ARM:STARt:COUNt. See the following table for the
relationship between ARM:STARt:COUNt and TRIG:STARt:COUNt.
• If the count is set to INFinity or 9.9E+37, the ABORt command must be used to
return the trigger system to the idle state.
• If pre-arm readings are specified (SENSe:SWEep:OFFSet:POINts < 0), then the
maximum number of arms is 128.
• When pre-arm readings are specified (SENSe:SWEep:OFFSet:POINts < 0), an
ARM:STARt:COUNt > 1 causes memory to be partitioned, and limits to be
placed on TRIGger:STARt:COUNt. See the following table for limits.
ARM[:STARt]:COUNt
188 Command Reference ARM Subsystem