Filter
Top Products
Comments • Executable when initiated: Yes
• Coupled command: No
• Related commands: *OPC, *OPC?, *RST, *WAI, ABORt, INITiate:IMMediate,
VINStrument:CONFigure:VME:MEMory:INITiate,
VINStrument:CONFigure:LBUS:MEMory:INITiate, STATus:PRESet
• *RST Condition: unaffected
• Power-on Condition: STATus:OPC:INITiate ON
Example Setting immediate completion mode
STAT:OPC:INIT OFF Complete immediately for *OPC, etc.
:OPERation|:QUEStionable:CONDition?
STATus:OPERation|:QUEStionable:CONDition? returns the contents of the
appropriate condition register. Reading the register does not affect its contents.
Comments • Executable when initiated: Yes
• Coupled command: No
• Related commands: STATus subsystem, *SRE, *STB?
• *RST Condition: all bits of both condition registers are cleared as a result of the
state present after *RST, except for the CALibration bit in the Questionable
Signal register, which will remain set if the error condition persists.
Example Querying the Operation condition register
STAT:OPER:COND? Query Operation condition register
:OPERation|:QUEStionable:ENABle
STATus:OPERation|:QUEStionable:ENABle <unmask > specifies which bits of
the associated event register are included in its summary bit. The summary bit is the
bit-for-bit logical AND of the event register and the unmasked bit(s).
STATus:OPERation|:QUEStionable:CONDition?
STATus Subsystem Command Reference 267